previous stack frame was the last, just as unw_step does. For x86_64,
drop the null check for ret_addr_column, since that check is made already
in apply_reg_state.
so that it will get saved and restored with the register state. Initialize
the rs_state version of ret_addr_column at the some time the dwarf_cursor
version is initialized, and don't bother copying ret_addr_column explicitly
from cursor to cache since it's copied implicitly as part of reg_state.
Use the reg_state version in apply_reg_state, instead of the cursor version.
Which brings up the question: why do we have ret_addr_column in the dwarf_cursor?
We call find_reg_state before calling apply_reg_state, so the value of ret_addr_column
in the cursor when dwarf_step gets called gets overwritten before it is used. So
it's initial value doesn't matter. But some architectures do funky things with
cursor->ret_addr_column, even though I don't see how they matter.
So I'm not deleting dwarf_cursor->ret_addr_column, even though I suspect this
patch makes it useless.
dwarf: If the dwarf_readu8 call to set op fails, and if there are register
states pushed onto the stack, the stack is not emptied before the function
returns. This change addresses that.
Most of the rest is eliminating ‘goto fail’ from the code.
0-valued hints are used when they are just initial values with no use as
hints. And I think there were some other problems as well.
This patch cleans up and stores hint values with 1 added, so that 0-valued
hints can be ignored.
unw_get_proc_info must always load the unwind info so that unw_resume
works with GNU_args_size expressions, but must not update
use_prev_expr unless we are unw_step()ing.
blame rev: 4b63a536ee
reported-by: Doug Moore <dougm@rice.edu>
libunwind already had support for local unwind on a MIPS. This patch makes
support for remote unwinding on a MIPS.
I should add a few words to the changes to _UPT_access_mem.c: On MIPS, an
unw_word_t is defined as a 64-bit integer whether it's compiled for a 32- or a
64-bit MIPS.
When doing remote unwinding using the default _UPT_accessors, dwarf_readu8()
therefore expects _UPT_access_mem() to return a 64-bit integer. However, if
compiled on a 32-bit MIPS, only 32 bits are valid upon return from
_UPT_access_mem(). The patch detects this and will in this case perform two
calls to ptrace(PTRACE_POKE/PEEK_DATA) and organize the return value according
to endianness.
Centralize gnu_debuglink logic in elfxx. Remove previous duplicated logic
from Gfind_proc_info and os-linux.
Logic is roughly the same as previous load_debug_frame, but uses VLAs
instead of malloc.
This fixes GCC 4.9.3 warnings (Linux/mipsel):
In file included from dwarf/Lfind_unwind_table.c:4:0:
dwarf/Gfind_unwind_table.c: In function '_ULmips_dwarf_find_unwind_table':
dwarf/Gfind_unwind_table.c:140:14: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]
addr = (unw_word_t) (hdr + 1);
^
dwarf/Gfind_unwind_table.c:196:50: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]
+ (addr - (unw_word_t) edi->ei.image
^
dwarf/Gfind_unwind_table.c:202:40: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]
+ ((unw_word_t) hdr - (unw_word_t)
edi->ei.image
^
dwarf/Gfind_unwind_table.c:202:59: warning: cast from pointer to integer of
different size [-Wpointer-to-int-cast]
+ ((unw_word_t) hdr - (unw_word_t)
edi->ei.image
^
```
src/dwarf/Gfind_proc_info-lsb.c:536:16: warning: 'eh_frame' may be used uninitialized in this function [-Wmaybe-uninitialized]
Elf_W (Addr) eh_frame;
^
```
Introduced-in: 25413c729a
It is possible to have multiple CFA_args_size adjustments for a single
frame. If the CFA_args_size adjustment is immediately following the
return from a function which can raise an exception, it is possible to
incorrectly adjust the stack pointer. Consider the following:
...
.cfi_escape 0x2e, 0x00
call f
.Ltmp:
.cfi_escape 0x2e, 0x10
lea label@GOTOFF(%ebx), %eax
...
Because we process the CFI program up to and *INCLUDING* IP, where the
IP is the RA, we would process the associated DW_CFA_GNU_args_size for
the post-call instruction. The result would be a DW_CFA_GNU_args_size
of 0x10 rather than 0x00, resulting in an incorrect stack adjustment.
Handle this by processing the CFI operation but not adjusting the state
record unless we are below the current IP.
Commit 92327a3 "ARM: prefer to unwind using DWARF info"
changes order of unwind info searching to prefer DWARF (.debug_frame)
section in prior to ARM specific (.ARM.exidx). This patch only affects
local process unwinding. Now the same is done for remote unwinding.
Sometimes probing .ARM.exidx first causes backtrace truncation
after __aeabi_ldiv0 (division by 0 handler that generates SIGFPE),
because it hits [cantunwind] generated by cross-gcc for __divsi3
function copied with __aeabi_ldiv0 from libgcc.a. Perhaps, lack of
debug info for __divsi3 causes [cantunwind], or there is a problem
converting DWARF to ARM unwind tables, but when unwinding using
DWARF, it hits proper entry, and backtrace is shown correctly.
Reported-by: Frederic Berat <fberat@de.adit-jv.com>
Signed-off-by: Vitaly Kuzmichev <Vitaly_Kuzmichev@mentor.com>
When adjusting the stack for a DW_CFA_arg_size adjustment, ensure that
we use the target dependent register name as the generic name does not
necessarily map to the same register. For example, on x86, ESP maps to
the eip register, which results in the wrong stack adjustment being
applied.
Debian likes to hive off symbol information to separate -dbg packages,
installing the debug information in a parallel tree rooted at /usr/lib/debug.
libunwind doesn't know how to find these files but it's easy, per the tested,
attached patch, to make it so. I don't see /usr/lib/debug at
http://www.pathname.com/fhs/pub/fhs-2.3.html#USRLIBLIBRARIESFORPROGRAMMINGANDPA
but
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/4/html/Debugging_with_gdb/separate-debug-files.html
says it's not just Debian and hints it might be driven by gdb. I do see mention
of /usr/lib/debug in libunwind already, but only in a DWARF-specific part of
the code. A minor concern might be checking errno to see if the problem is
ENOENT before trying the alternate path. That might be better than flogging a
mmap problem or being out of file handles or whatever.
Add interface for configurable dwarf cache size
* Use item size and round up to nearest power of 2.
* Initial cache still exists in BSS. Without this, it means we would fail
backtrace when out of memory. The test-mem test fails without this
Currently setcontext for x86_64 restores the signal mask, even
though it is never saved anywhere. This means the signal mask
is often garbage after an unw_resume.
(changed in commit f8a15e9679)
It looks like this was a fix for the Gtest-resume-sig function -
testing if signal masks are restored across signal frames. The
root issue looks like that x86_64 only uses sigreturn for the exact
signal frame, and not for any decedant frames as well (as i64 does).
Instead, modify Gresume to use sigreturn if *any* frame on the stack
is a signal frame, so that we correct fixup the signal mask and any
sigaltstacks. The sigreturn os-specific functions are changed slightly
to copy in the saved ucontext structure if we are jumping farther
up the stack.
This should fix sigprocmask reported issues such as
https://github.com/dropbox/pyston/blob/master/libunwind_patches/0002-pyston-stop-x86_64-setcontext-restoring-uninitialize.patch
Tests pass on freebsd, linux
When resuming execution, DW_CFA_GNU_args_size from the current frame
must be added back to the stack pointer. Clang now generates these frequently
at -O3. A simple repro for x86_64, that will crash with clang ~3.9 or newer:
void f(int, int,int,int,int,int,int,int,int);
int main() {
try {
f(0,1,2,3,4,5,6,7,8);
} catch (int) {
return 0;
}
return 1;
}
Where f is something that throws an int, but in a different translation unit to
prevent optimization.
This results in cfi instructions before the call:
.cfi_escape 0x2e, 0x20
Grabbing the args_size means fully parsing the cfi in the current frame, which
is unfortunate because it means nearly twice the work at each step. The logic
to grab args_size can be in unw_step or get_proc_info (since this is always
called before resuming in stack unwinding). Putting it in get_proc_info allows
the more common unw_step code to remain fast.
It would potentially fit in nicely with a proc info cache (as mentioned in the
if0 comment block)
GCC versions 4.9~current will often generate stack alignment prologues like:
lea 0x8(%rsp),%r10
and $0xfffffffffffffff0,%rsp
...
push %rbp
mov %rsp, %rbp
push %r10
resulting in dwarf expressions:
DW_CFA_def_cfa_expression (DW_OP_breg6: -8; DW_OP_deref)
DW_CFA_expression: r6 (rbp) (DW_OP_breg6: 0)
These prologues seem to be generated for SSE/AVX code, but sometimes
other times as well.
tdep_trace fastpath currently falls back to the slow dwarf parsing path
if it encounters any cfa_expressions. Unfortunately this is happening
often enough in our codebase to cause perf issues. We could also fix the
fallback path (make the rs cache bigger, lock-free instead of locking, etc),
but that seems like a separate issue, and it will ever be as fast as the tracing
code. Our binaries each have at least ~100 functions in them like this.
This patch teaches the tdep_trace about the two specific cfa_expressions,
which really just result in a single extra memory dereference of the stack
at a fixed offset from rbp.
next = inote.descdata + align_power (inote.descsz, 2);
this align is missing, leading to parsing errors. In one case
libunwind only found 1 thread out of 4.
Improves support for binaries missing the GNU_EH_FRAME segment
(.eh_frame_hdr section) by adding a function
'dwarf_find_eh_frame_section' that can create a synthetic one.
unw_is_signal_frame() returns <= 0 if not a signal frame. Several places in
code were only checking for a "if (unw_is_signal_frame())", or
"if (!unw_is_signal_frame())".
This fixes GCC 4.9.3 warnings (Linux/mipsel):
dwarf/Gfind_proc_info-lsb.c: In function 'locate_debug_info':
dwarf/Gfind_proc_info-lsb.c:244:23: warning: 'mi.buf_end' may be used
uninitialized in this function [-Wmaybe-uninitialized]
struct map_iterator mi;
^
dwarf/Gfind_proc_info-lsb.c:244:23: warning: 'mi.buf' may be used
uninitialized in this function [-Wmaybe-uninitialized]
In file included from dwarf/Gfind_proc_info-lsb.c:46:0:
./os-linux.h:292:27: warning: 'mi.buf_size' may be used uninitialized in
this function [-Wmaybe-uninitialized]
munmap (mi->buf_end - mi->buf_size, mi->buf_size);
^
dwarf/Gfind_proc_info-lsb.c:244:23: note: 'mi.buf_size' was declared here
struct map_iterator mi;
^
The detection logic introduced in 28f33c8ce0 is
broken, because it tests mincore using an address that is almost certainly not
page-aligned. straces confirms that msync is used all the time.
This patch fixes the logic by page-aligning the test pointer. strace now shows
that mincore is actually used. Furthermore, the return value of mincore is not
sufficient to assess whether the address can be safely dereferenced: we should
also check that the pages are mapped, through the passed mvec array. This patch
also adds this verification.
Tested on a system where unwinding a stack across a JNI boundary would cause
sporadic segfaults; no more crashes were observed after the patch.
A recent commit added code to override the unwind location for the
TOC pointer register r2:
unsigned int *inst = (unw_word_t*)c->dwarf.ip;
if (*inst == (0xE8410000 + 24)) {
// @plt call, restoring R2 from CFA+24
c->dwarf.loc[UNW_PPC64_R2] = DWARF_LOC(c->dwarf.cfa + 24, 0);
}
It is correct that such code is needed, since DWARF CFI does not
describe the unwind location for r2 on PowerPC. However, this
particular bit of code has a number of issues, which are fixed
in this patch.
First of all, the location CFA+24 is correct only for the ELFv2
ABI. In the ELFv1 ABI, the TOC location is actually CFA+40.
More problematically, attempting to read the current instruction
by just dereferencing the address in c->dwarf.ip is wrong, and
may often lead to crashes. In particular:
- During remote unwinding, this is always wrong since we're in
the wrong address space. I've used the fetch32 helper from
remote.h to use the proper access_mem under the covers.
- c->dwarf.ip may be NULL if we've reached the end-of-stack.
I've fixed this by moving the c->dwarf.ip == 0 check down
to after unwinding (instead of before), just like all other
platforms do.
- Even so, c->dwarf.ip may point to some random location if
we've gotten confused during unwinding earlier. One likely
cause for such confusion is that we did not find DWARF CFI
for some earlier frame and attempted to use the stack
backchain. The problem is that this code currently claims
all registers remain unchanges in such a frame, which is
generally wrong. In particular if the function actually
saves and modifies r31, and this is used as frame pointer
by a later frame, things will likely go quite wrong. While
it is not really possibly to completely fix this, I've at
least marked all registers as unavailable after unwinding
a frame via stack backchain.
Tested on powerpc64-linux and powerpc64le-linux. The patch fixes
about a dozen test cases that were crashing before.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
By default, the start_ip_offset in libunwind's table_entry struct is
relative to the unw_dyn_info_t's segbase. This presents a problem
for us in conjunction with using LLVM's MCJIT because it likes to
spread text sections and the corresponding eh_frame sections quite
far apart. This represents my attempt to support this use case in the
simplest manner that is backwards compatible, by adding a new format
kind (UNW_INFO_FORMAT_REMOTE_TABLE2) that indicates that the
`start_ip_offset` should be interpreted as relative to `start_ip`
rather than segbase.
Detect if current frame is a signal frame by checking for preceeding
syscall instruction. For signal frames, update the cursor correctly
from user context before calling dwarf_step.
Due to a bug in the gold linker[1], the .eh_frame and .eh_frame_hdr
sections contains garbage. When dwarf_extract_proc_info_from_fde tried
to look up the begin of the CIE subsection, it would underflow the
.eh_frame segment, resulting in a crash[2].
This patch avoids that crash by checking whether the CIE pointer is
located after the begin of the .eh_frame section. The variable "base"
was misused in various places as a boolean (decode as .debug_frame or
decode as .eh_frame). These instances have been renamed to
is_debug_frame where applicable.
Tested on Linux x86_64.
[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=17639
[2]: http://lists.nongnu.org/archive/html/libunwind-devel/2014-11/msg00009.html
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Set local_addr_space.big_endian flag according to current target
endianness. Before it was set by memset to 0, which corresponds
to little endian and it worked perfectly fine for aarch64.
But it breaks aarch64_be because dwarf_readu16, dwarf_readu32,
etc functions do not read values correctly since they operate
with wrong idea about current target endianness.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
We've just traced a large memory increase to that patch (Google ref:
b/18069427).
It appears that labs() was there for a good reason.
Sorry about that :-(
For the curious:
unsigned long u1 = ~0UL;
unsigned long u2 = labs(u1);
assert(u1 != u2); // labs on unsigned *may* have an effect, despite
what Clang says.
Attached patch suppresses the Clang warning, while still keeping the
original behavior (which I believe to be correct).
Thanks,
--
Paul Pluzhnikov
Greetings,
Roman reports that Clang warns on unnecessary calls to labs():
taking the absolute value of unsigned type 'unw_word_t' (aka
'unsigned long') has no effect [-Werror,-Wabsolute-value]
Since rs->reg[...].val is unw_word_t and unsigned on all platforms,
this patch removes the unnecessary calls to labs().
Tested on Linux x86_64, no regressions.
Thanks,
--
Paul Pluzhnikov
Fix returning the name of the function containing the frame PC,
for the non-interrupted frames. The symbol lookup code should
take use_prev_instr value into account, otherwise it could return
the name of the function adjacent to the caller.
Mark frames which are unwound with the frame-chain walker or
syscall frame code, as non-interrupted. The return PC in the frame
points to the instruction after the call.
We already have the value computed based on the executable. Furthermore,
debuginfo need not have valid program header table, thus the result
might be bogus.
Signed-off-by: Martin Milata <mmilata@redhat.com>
When JITs generate code without unwind information, it may be possible
to continue unwinding via RBP chaining. However, we currently disallow
RBP==RSP condition even though we can make forward progress.
Relax the check a bit in the code where we switch from one type of
unwinding to another to handle this situation. JIT authors
are encouraged to use the dynamic unwind info registration API when
the underlying platform supports it.
Signed-off-by: Kevin Modzelewski <kmod@dropbox.com>
The attached patch simply modifies the Debug statements for aarch64 to use
%lx instead of %x. Tested by compiling for aarch64 using a cross-compiler.
Signed-off-by: Christopher Ferris <cferris@google.com>
The coredump/elf32/elf64/elfxx libs use lzma funcs but don't link against
it. This produces sub-shared libs that don't link against lzma and can
make the linker angry due to underlinking like so:
libtool: link: x86_64-pc-linux-gnu-gcc -O2 -march=amdfam10 -pipe -g \
-frecord-gcc-switches -Wimplicit-function-declaration -fexceptions \
-Wall -Wsign-compare -Wl,-O1 -Wl,--hash-style=gnu \
-o .libs/test-coredump-unwind test-coredump-unwind.o \
../src/.libs/libunwind-coredump.so ../src/.libs/libunwind-x86_64.so
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_stream_footer_decode'
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_index_buffer_decode'
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_index_size'
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_index_end'
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_index_uncompressed_size'
../src/.libs/libunwind-coredump.so: error: undefined reference to 'lzma_stream_buffer_decode'
collect2: error: ld returned 1 exit status
So add LIBLZMA to the right LIBADD for each of these libraries.
URL: https://bugs.gentoo.org/444050
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Ubuntu's libc-bin (2.15-0ubuntu20.2) on x86_64 uses DW_CFA_val_expression
in describing the pthread spinlock operations __lll_unlock_wake() and
__lll_lock_wait(). libunwind 1.1 doesn't understand that opcode and
so backtraces from those operations are truncated.
This changeset adds basic support for it, by adding a new type to
dwarf_loc_t that describes the register's actual contents rather than
its location. I've only implemented the new type for x86_64, and
stubbed it out for all other architectures -- it looks like a lot
of that code is duplicated so oughtn't to be that hard, but I don't
have test cases for them.
Tested that DW_CFA_val_expression works on x86_64 (by using
https://code.google.com/p/gperftools/ on a lock-heavy program).
Build-tested on x86, x86_64 and arm. The unit tests don't pass for me
on any of those archs, but this cset doesn't break anything that was
passing before.
Signed-off-by: Tim Deegan <tjd@phlegethon.org>
This patch adds support for the powerpc64le-linux platform. It consists
of two main features:
- Support little-endian byte order
This is done via a "big_endian" member of struct unw_addr_space,
which is evaluated by common code via the dwarf_is_big_endian
macro, and also in endian-aware code in unw_is_signal_frame.
- Support the ELFv2 ABI
This is done via an "abi" member of struct unw_addr_space. This
is currently only needed in tdep_get_func_addr, since the ELFv2
ABI does not use function descriptors.
Both new members are initialized in unw_create_addr_space and
ppc64_local_addr_space_init, following the mips precedent.
Since ppc32 and ppc64 now no longer share the unw_create_addr_space
implementation, the file is duplicated from the ppc directory into
ppc32/ppc64.
Tested on powerpc64-linux and powerpc64le-linux. Support on LE
seems to be as good as existing BE support; I have not attempted to
fix the existing shortcomings of PPC support that already cause a
number to tests to fail due to unimplemented features.
Signed-off-by: Ulrich Weigand <uweigand@de.ibm.com>
The ppc64 implementation of tdep_get_func_addr would crash when
attempting to retrieve the address of a function in a shared
library. The problem was that it needs to dereference the
function descriptor, but common code was passing the *unrelocated*
adddress of the descriptor to the tdep_get_func_addr routine.
Instead, common code would attempt to relocate the *result* of
tdep_get_func_addr, which is also wrong: the ppc64 implementation
reads the function address from the in-memory copy of the
descriptor, which is already relocation and contains the final
address.
This patch fixes the problem by relocating the descriptor address
before passing it to tdep_get_func_addr, instead of relocating
the result of tdep_get_func_addr. Since ppc64 is the only
non-trivial implementation of tdep_get_func_addr, this cannot
affect any other platform.
Signed-off-by: Ulrich Weigand <uweigand@de.ibm.com>
The dwarf_eval_expr routine uses macros push, pop, and pick to
manipulate the DWARF expression stack. When these macros are
nested, e.g. in the implementation of DW_OP_dup:
push (pick (0));
the combination can lead to unfortunate results.
In particular, when substituting into:
do {
if (tos >= MAX_EXPR_STACK_SIZE)
{
Debug (1, "Stack overflow\n");
return -UNW_EINVAL;
}
stack[tos++] = (x);
} while (0)
a value of "x" that makes use of "tos" (as instances of the
pick or pop macros do), the resulting expression will both
use and modify tos without an intervening sequence point,
which is undefined behavior according to the C standard.
And in fact with current GCC on PowerPC, this leads to a
miscompilation of the DW_OP_dup implementation.
This patch fixes the problem by assigning "x" to a
temporary variable before modifying tos.
Signed-off-by: Ulrich Weigand <uweigand@de.ibm.com>
liblzuma used in decoding MiniDebuginfo is not listed in
libunwind.pc.
Changes in version 2 of patch:
* Don't check HAVE_LZMA. It is redundant.
* Make liblzma as private libraries in use.
Both are suggested by Mike Frysinger <vapier@gentoo.org>.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
pkg-config metadata template files are missing Cflags keyword
which is required to properly compile against libunwind using
PKG_* autoconf macros
Acked-by: Mike Frysinger <vapier@gentoo.org>
The DWARF code allocates its unwind_info objects out of a
memory pool. The code which frees the object therefore calls
the mempool freeing code. However, there are cases where the
free code will be run with an unwind_info that was allocated
through a different mechanism (e.g. an ARM exidx table entry).
In these cases, the object should not be freed through the
mempool code.
To correct this, a check was added to ensure that the unwind_info
is of the appropriate type before passing the object along to the
mempool to be freed.
This change adds some special cases to allow libunwind to compile
for QNX.
* QNX's copy of <elf.h> and <link.h> reside in sys/ instead. To deal
with this, an AC_CHECK_HEADERS() was added to check for the files
in both locations.
* Similarly, QNX does not have <endian.h>. In cases where the file is
not found, logic was added to refer to QNX-specific macros to determine
endianness.
* The QCC compiler, which is a wrapper around GCC, cannot handle some
standard GCC options. Therefore, logic was added to check for QCC,
and when it is found, to suppress the use of -lgcc, and to express the
option -nostartfiles as -Wc,-nostartfiles instead, which is correctly
passed on to the underlying GCC.
* Finally, the support file os-qnx.c was added, patterned after the existing
os-*.c files. Only local image lookup is currently supported (see the
comments for more information), but this is sufficient for QNX, since
ptrace is not supported there anyway, and that is the only case where the
function is required to do remote image lookup.
Change-Id: Ie7934f94a7317bdde59335f2acd4c3a97c0384c1
During the install, symlinks are added from libunwind-<arch> to
libunwind-generic. However, on platforms that don't support
symlinking (such as Windows), the $(LN_S) macro is defined
as 'cp -p' instead. This works fine, except that since the
target of the symlink is a relative path, the copy will only
succeed if the current directory is the directory that contains
the file.
The solution to this problem suggested in the Autotools manual
(see http://www.gnu.org/software/automake/manual/automake.html#Extending)
is to simply cd into the correct directory first. This patch
makes that change for the symlinks that are being made during install.
[ edit: use relative path for the link name as well ]
Currently, libunwind-setjmp is built whenever local unwinding is
built. This patch adds an explicit flag to control it instead.
The default if not specified is to follow the old behavior.
