libunwind-eh_elf/doc/libunwind.tex

\documentclass{article}
\usepackage[fancyhdr,pdf]{latex2man}

\input{common.tex}

\begin{document}

\begin{Name}{3}{libunwind}{David Mosberger-Tang}{Programming Library}{Introduction to libunwind}libunwind -- a (mostly) platform-independent unwind API
\end{Name}

\section{Synopsis}

\File{\#include $<$libunwind.h$>$}\\

\noindent
\Type{int} \Func{unw\_getcontext}(\Type{unw\_context\_t~*});\\
\noindent
\Type{int} \Func{unw\_init\_local}(\Type{unw\_cursor\_t~*}, \Type{unw\_context\_t~*});\\
\noindent
\Type{int} \Func{unw\_init\_remote}(\Type{unw\_cursor\_t~*}, \Type{unw\_addr\_space\_t}, \Type{void~*});\\
\noindent
\Type{int} \Func{unw\_step}(\Type{unw\_cursor\_t~*});\\
\noindent
\Type{int} \Func{unw\_get\_reg}(\Type{unw\_cursor\_t~*}, \Type{unw\_regnum\_t}, \Type{unw\_word\_t~*});\\
\noindent
\Type{int} \Func{unw\_get\_fpreg}(\Type{unw\_cursor\_t~*}, \Type{unw\_regnum\_t}, \Type{unw\_fpreg\_t~*});\\
\noindent
\Type{int} \Func{unw\_set\_reg}(\Type{unw\_cursor\_t~*}, \Type{unw\_regnum\_t}, \Type{unw\_word\_t});\\
\noindent
\Type{int} \Func{unw\_set\_fpreg}(\Type{unw\_cursor\_t~*}, \Type{unw\_regnum\_t}, \Type{unw\_fpreg\_t});\\
\noindent
\Type{int} \Func{unw\_resume}(\Type{unw\_cursor\_t~*});\\

\noindent
\Type{unw\_addr\_space\_t} \Var{unw\_local\_addr\_space};\\
\noindent
\Type{unw\_addr\_space\_t} \Func{unw\_create\_addr\_space}(\Type{unw\_accessors\_t}, \Type{int});\\
\noindent
\Type{void} \Func{unw\_destroy\_addr\_space}(\Type{unw\_addr\_space\_t});\\
\noindent
\Type{unw\_accessors\_t} \Func{unw\_get\_accessors}(\Type{unw\_addr\_space\_t});\\
\noindent
\Type{void} \Func{unw\_flush\_cache}(\Type{unw\_addr\_space\_t}, \Type{unw\_word\_t}, \Type{unw\_word\_t});\\
\noindent
\Type{int} \Func{unw\_set\_caching\_policy}(\Type{unw\_addr\_space\_t}, \Type{unw\_caching\_policy\_t});\\

\noindent
\Type{const char *}\Func{unw\_regname}(\Type{unw\_regnum\_t});\\
\noindent
\Type{int} \Func{unw\_get\_proc\_info}(\Type{unw\_cursor\_t~*}, \Type{unw\_proc\_info\_t~*});\\
\noindent
\Type{int} \Func{unw\_get\_save\_loc}(\Type{unw\_cursor\_t~*}, \Type{int}, \Type{unw\_save\_loc\_t~*});\\
\noindent
\Type{int} \Func{unw\_is\_fpreg}(\Type{unw\_regnum\_t});\\
\Type{int} \Func{unw\_is\_signal\_frame}(\Type{unw\_cursor\_t~*});\\
\noindent
\Type{int} \Func{unw\_get\_proc\_name}(\Type{unw\_cursor\_t~*}, \Type{char~*}, \Type{size\_t}, \Type{unw\_word\_t~*});\\

\noindent
\Type{void} \Func{\_U\_dyn\_register}(\Type{unw\_dyn\_info\_t~*});\\
\noindent
\Type{void} \Func{\_U\_dyn\_cancel}(\Type{unw\_dyn\_info\_t~*});\\

\section{Local Unwinding}

\Prog{Libunwind} is very easy to use when unwinding a stack from
within a running program.  This is called \emph{local} unwinding.  Say
you want to unwind the stack while executing in some function
\Func{F}().  In this function, you would call \Func{unw\_getcontext}()
to get a snapshot of the CPU registers (machine-state).  Then you
initialize an \emph{unwind~cursor} based on this snapshot.  This is
done with a call to \Func{unw\_init\_local}().  The cursor now points
to the current frame, that is, the stack frame that corresponds to the
current activation of function \Func{F}().  The unwind cursor can then
be moved ``up'' (towards earlier stack frames) by calling
\Func{unw\_step}().  By repeatedly calling this routine, you can
uncover the entire call-chain that led to the activation of function
\Func{F}().  A positive return value from \Func{unw\_step}() indicates
that there are more frames in the chain, zero indicates that the end
of the chain has been reached, and any negative value indicates that
some sort of error has occurred.

While it is not possible to directly move the unwind cursor in the
``down'' direction (towards newer stack frames), this effect can be
achieved by making copyies of an unwind cursor.  For example, a
program that sometimes has to move ``down'' by one stack frame could
maintain two cursor variables: ``\Var{curr}'' and ``\Var{prev}''.  The
former would be used as the current cursor and \Var{prev} would be
maintained as the ``previous frame'' cursor by copying the contents of
\Var{curr} to \Var{prev} right before calling \Func{unw\_step}().
With this approach, the program could move one step ``down'' simply by
copying back \Var{prev} to \Var{curr} whenever that is necessary.  In
the mosts extreme case, a program could maintain a separate cursor for
each call frame and that way it could move up and down the call frame
chain at will.

Given an unwind cursor, it is possible to read and write the CPU
registers that were preserved for the current stack frame identified
by the cursor.  \Prog{Libunwind} provides several routines for this
purpose: \Func{unw\_get\_reg}() reads an integer (general) register,
\Func{unw\_get\_fpreg}() reads a floating-point register,
\Func{unw\_set\_reg}() writes an integer register, and
\Func{unw\_set\_fpreg}() writes a floating-point register.  Note that,
by definition, only the \emph{preserved} machine state can be accessed
during an unwind operation.  Normally, this state consists of the
\emph{callee-saved} (``preserved'') registers.  However, in some
special circumstances (e.g., in a signal handler trampoline), even the
\emph{caller-saved} (``scratch'') registers are preserved in the stack
frame and, in those cases, \Prog{libunwind} will grant access to them
as well.  The exact set of registers that can be accessed via the
cursor depends, of course, on the platform.  However, there are two
registers that can be read on all platforms: the instruction pointer
(IP), sometimes also known as the ``program counter'', and the stack
pointer (SP).  In \Prog{libunwind}, these registers are identified by
the macros \Const{UNW\_REG\_IP} and \Const{UNW\_REG\_SP},
respectively.

Besides just moving the unwind cursor and reading/writing saved
registers, \Prog{libunwind} also provides the ability to resume
execution at an arbitrary stack frame.  As you might guess, this is
useful for implementing non-local gotos and the exception handling
needed by some high-level languages such as Java.  Resuming execution
with a particular stack frame simply requires calling
\Func{unw\_resume}() and passing the cursor identifying the target
frame as the only argument.

Normally, \Prog{libunwind} supports both local and remote unwinding
(the latter will be explained in the next section).  However, if you
tell libunwind that your program only needs local unwinding, then a
special implementation can be selected which may run much faster than
the generic implementation which supports both kinds of unwinding.  To
select this optimized version, simply define the macro
\Const{UNW\_LOCAL\_ONLY} before including the headerfile
\File{$<$libunwind.h$>$}.  If is perfectly OK for a single program to
employ both local-only and generic unwinding.  That is, whether or not
\Const{UNW\_LOCAL\_ONLY} is defined is a choice that each source-file
(compilation-unit) can make on its own.  Independent of the setting(s)
of \Const{UNW\_LOCAL\_ONLY}, you'll always link the same library into
the program (normally \Opt{-l}\File{unwind}).

If we put all of the above together, here is how we could use
\Prog{libunwind} write function \Func{show\_backtrace}() which prints
a classic stack trace:

\begin{verbatim}
#define UNW_LOCAL_ONLY
#include <libunwind.h>

void show_backtrace (void) {
  unw_cursor_t cursor; unw_context_t uc;
  unw_word_t ip, sp;

  unw_getcontext(&uc);
  unw_init_local(&cursor, &uc);
  while (unw_step(&cursor) > 0) {
    unw_get_reg(&cursor, UNW_REG_IP, &ip);
    unw_get_reg(&cursor, UNW_REG_SP, &sp);
    printf ("ip = %lx, sp = %lx\n", (long) ip, (long) sp);
  }
}
\end{verbatim}


\section{Remote Unwinding}

\Prog{Libunwind} can also be used to unwind a stack in a ``remote''
process.  Here, ``remote'' may mean another process on the same
machine or even a process on a completely different machine from the
one that is running \Prog{libunwind}.  Remote unwinding is typically
used by debuggers and instruction-set simulators, for example.

Before you can unwind a remote process, you need to create a new
address-space object for that process.  This is achieved with the
\Func{unw\_create\_addr\_space} routine.  The routine takes two
arguments: a pointer to a set of \emph{accessor} routines and an
integer that specifies the byte-order of the target process.  The
accessor routines provide \Func{libunwind} with the means to
communicate with the remote process.  In particular, there are
callbacks to read and write the process's memory, its registers, and
to access unwind information which may be needed by \Func{libunwind}.

With the address space created, unwinding can be initiated by a call
to \Func{unw\_init\_remote}().  This routine is very similar to
\Func{unw\_init\_local}(), except that it takes an address-space
object and an opaque pointer as arguments.  The routine uses these
arguments to fetch the initial machine state.  \Prog{Libunwind} never
uses the opaque pointer on its own, but instead justs passes it on to
the accessor (callback) routines.  Typically, this pointer is used to
select, e.g., the thread within a process that is to be unwound.

Once a cursor has been initialized with \Func{unw\_init\_remote}(),
unwinding works exactly like in the local case.  That is, you can use
\Func{unw\_step} to move ``up'' in the call-chain, read and write
registers, or resume execution at a particular stack frame by calling
\Func{unw\_resume}.


\section{Cross-platform and Multi-platform Unwinding}

\Prog{Libunwind} has been designed to enable unwinding across
platforms (architectures).  Indeed, a single program can use
\Prog{libunwind} to unwind an arbitrary number of target platforms,
all at the same time!

We call the machine that is running \Prog{libunwind} the \emph{host}
and the machine that is running the process being unwound the
\emph{target}.  If the host and the target platform are the same, we
call it \emph{native} unwinding.  If they differ, we call it
\emph{cross-platform} unwinding.

The principle behind supporting native, cross-platform, and
multi-platform unwinding are very simple: for native unwinding, a
program includes \File{$<$libunwind.h$>$} and uses the linker switch
\Opt{-l}\File{unwind}.  For cross-platform unwinding, a program
includes \File{$<$libunwind-}\Var{PLAT}\File{.h$>$} and uses the linker
switch \Opt{-l}\File{unwind-}\Var{PLAT}, where \Var{PLAT} is the name
of the target platform (e.g., \File{ia64} for IA-64, \File{hppa-elf}
for ELF-based HP PA-RISC, or \File{x86} for 80386).  Multi-platform
unwinding works exactly like cross-platform unwinding, the only
limitation is that a single source file (compilation unit) can include
at most one \Prog{libunwind} header file.  In other words, the
platform-specific support for each supported target needs to be
isolated in separate source files---a limitation that shouldn't be an
issue in practice.

Note that, by definition, local unwinding is possible only for the
native case.  Attempting to call, e.g., \Func{unw\_local\_init}() when
targeting a cross-platform will result in a link-time error
(unresolved references).


\section{Thread- and Signal-Safety}


All \Prog{libunwind} routines are thread-safe.  What this means is
that multiple threads may use \Prog{libunwind} simulatenously.
However, any given cursor may be accessed by only one thread at
any given time.

To ensure thread-safety, some \Prog{libunwind} routines may have to
use locking.  Such routines \emph{must~not} be called from signal
handlers (directly or indirectly) and are therefore \emph{not}
signal-safe.  The manual page for each \Prog{libunwind} routine
identifies whether or not it is signal-safe, but as a general rule,
any routine that may be needed for \emph{local} unwinding is
signal-safe (e.g., \Func{unw\_step}() for local unwinding is
signal-safe).  For remote-unwinding, \emph{none} of the
\Prog{libunwind} routines are guaranteed to be signal-safe.


\section{Unwinding Through Dynamically Generated Code}

\Func{Libunwind} provides the routines \Func{\_U\_dyn\_register}() and
\Func{\_U\_dyn\_cancel} to register/cancel the information required to
unwind through code that has been generated at runtime (e.g., by a
just-in-time (JIT) compiler).  It is important to register the
information for \emph{all} dynamically generated code because
otherwise, a debugger may not be able to function properly or
high-level language exception handling may not work as expected.

The interface for registering and canceling dynamic unwind info has
been designed for maximum efficiency, so as to minimize the
performance impact on JIT-compilers.  In particular, both routines are
guaranteed to execute in ``constant time'' (O(1)) and the
data-structure encapsulating the dynamic unwind info has been designed
to facilitate sharing, such that similar procedures can share much of
the underlying information.


\section{Caching of Unwind Info}

To speed up execution, \Prog{libunwind} may aggressively cache the
information it needs to perform unwinding.  If a process changes
during its lifetime, this creates a risk of \Prog{libunwind} using
stale data.  For example, this would happen if \Prog{libunwind} were
to cache information about a shared library which later on gets
unloaded (e.g., via \Cmd{dlclose}{3}).

To prevent the risk of using stale data, \Prog{libunwind} provides two
facilities: first, it is possible to flush the cached information
associated with a specific address range in the target process (or the
entire address space, if desired).  This functionality is provided by
\Func{unw\_flush\_cache}().  The second facility is provided by
\Func{unw\_set\_caching\_policy}(), which lets a program
select the exact caching policy in use for a given address-space
object.  In particular, by selecting the policy
\Const{UNW\_CACHE\_NONE}, it is possible to turn off caching
completely, therefore eliminating the risk of stale data alltogether
(at the cost of slower execution).  By default, caching is enabled for
local unwinding only.


\section{Files}

\begin{Description}
\item[\File{libunwind.h}] Headerfile to include for native (same
  platform) unwinding.
\item[\File{libunwind-}\Var{PLAT}\File{.h}] Headerfile to include when
  unwind target runs on platform \Var{PLAT}.  For example, to unwind
  an IA-64 program, the header file \File{libunwind-ia64.h} should be
  included.
\item[\Opt{-l}\File{unwind}] Linker-switch to add when building a
  program that does native (same platform) unwinding.
\item[\Opt{-l}\File{unwind-}\Var{PLAT}] Linker-switch to add when
  building a program that unwinds a program on platform \Var{PLAT}.
  For example, to (cross-)unwind an IA-64 program, the linker switch
  \File{-lunwind-ia64} should be added.  Note: multiple such switches
  may need to be specified for programs that can unwind programs on
  multiple platforms.
\end{Description}

\section{See Also}

\SeeAlso{libunwind-ia64(3)},
\SeeAlso{libunwind-ptrace(3)},
\SeeAlso{libunwind-setjmp(3)},
\SeeAlso{unw\_create\_addr\_space(3)},
\SeeAlso{unw\_destroy\_addr\_space(3)},
\SeeAlso{unw\_flush\_cache(3)},
\SeeAlso{unw\_get\_accessors(3)},
\SeeAlso{unw\_get\_fpreg(3)},
\SeeAlso{unw\_get\_proc\_info(3)},
\SeeAlso{unw\_get\_proc\_name(3)},
\SeeAlso{unw\_get\_reg(3)},
\SeeAlso{unw\_getcontext(3)},
\SeeAlso{unw\_init\_local(3)},
\SeeAlso{unw\_init\_remote(3)},
\SeeAlso{unw\_is\_fpreg(3)},
\SeeAlso{unw\_is\_signal\_frame(3)},
\SeeAlso{unw\_regname(3)},
\SeeAlso{unw\_resume(3)},
\SeeAlso{unw\_set\_caching\_policy(3)},
\SeeAlso{unw\_set\_fpreg(3)},
\SeeAlso{unw\_set\_reg(3)},
\SeeAlso{unw\_step(3)}

\section{Author}

\noindent
David Mosberger-Tang\\
Hewlett-Packard Labs\\
Palo-Alto, CA 94304\\
Email: \Email{davidm@hpl.hp.com}\\
WWW: \URL{http://www.hpl.hp.com/research/linux/libunwind/}.
\LatexManEnd

\end{document}