libunwind-eh_elf/doc/libunwind-dynamic.man

'\" t
.\" Manual page created with latex2man on Sat Dec 20 22:00:11 PST 2003
.\" NOTE: This file is generated, DO NOT EDIT.
.de Vb
.ft CW
.nf
..
.de Ve
.ft R

.fi
..
.TH "LIBUNWIND\-DYNAMIC" "3" "20 December 2003" "Programming Library " "Programming Library "
.SH NAME
libunwind\-dynamic
\-\- libunwind\-support for runtime\-generated code 
.PP
.SH INTRODUCTION

.PP
For libunwind
to do its job, it needs to be able to reconstruct 
the \fIframe state\fP
of each frame in a call\-chain. The frame state 
describes the subset of the machine\-state that consists of the 
\fIframe registers\fP
(typically the instruction\-pointer and the 
stack\-pointer) and all callee\-saved registers (preserved registers). 
The frame state describes each register either by providing its 
current value (for frame registers) or by providing the location at 
which the current value is stored (callee\-saved registers). 
.PP
For statically generated code, the compiler normally takes care of 
emitting \fIunwind\-info\fP
which provides the minimum amount of 
information needed to reconstruct the frame\-state for each instruction 
in a procedure. For dynamically generated code, the runtime code 
generator must use the dynamic unwind\-info interface provided by 
libunwind
to supply the equivalent information. This manual 
page describes the format of this information in detail. 
.PP
For the purpose of this discussion, a \fIprocedure\fP
is defined to 
be an arbitrary piece of \fIcontiguous\fP
code. Normally, each 
procedure directly corresponds to a function in the source\-language 
but this is not strictly required. For example, a runtime 
code\-generator could translate a given function into two separate 
(discontiguous) procedures: one for frequently\-executed (hot) code and 
one for rarely\-executed (cold) code. Similarly, simple 
source\-language functions (usually leaf functions) may get translated 
into code for which the default unwind\-conventions apply and for such 
code, it is not strictly necessary to register dynamic unwind\-info. 
.PP
A procedure logically consists of a sequence of \fIregions\fP\&.
Regions are nested in the sense that the frame state at the end of one 
region is, by default, assumed to be the frame state for the next 
region. Each region is thought of as being divided into a 
\fIprologue\fP,
a \fIbody\fP,
and an \fIepilogue\fP\&.
Each of them 
can be empty. If non\-empty, the prologue sets up the frame state for 
the body. For example, the prologue may need to allocate some space 
on the stack and save certain callee\-saved registers. The body 
performs the actual work of the procedure but does not change the 
frame state in any way. If non\-empty, the epilogue restores the 
previous frame state and as such it undoes or cancels the effect of 
the prologue. In fact, a single epilogue may undo the effect of the 
prologues of several (nested) regions. 
.PP
We should point out that even though the prologue, body, and epilogue 
are logically separate entities, optimizing code\-generators will 
generally interleave instructions from all three entities. For this 
reason, the dynamic unwind\-info interface of libunwind
makes no 
distinction whatsoever between prologue and body. Similarly, the 
exact set of instructions that make up an epilogue is also irrelevant. 
The only point in the epilogue that needs to be described explicitly 
by the dynamic unwind\-info is the point at which the stack\-pointer 
gets restored. The reason this point needs to be described is that 
once the stack\-pointer is restored, all values saved in the 
deallocated portion of the stack frame become invalid and hence 
libunwind
needs to know about it. The portion of the frame 
state not saved on the stack is assume to remain valid through the end 
of the region. For this reason, there is usually no need to describe 
instructions which restore the contents of callee\-saved registers. 
.PP
Within a region, each instruction that affects the frame state in some 
fashion needs to be described with an operation descriptor. For this 
purpose, each instruction in the region is assigned a unique index. 
Exactly how this index is derived depends on the architecture. For 
example, on RISC and EPIC\-style architecture, instructions have a 
fixed size so it\&'s possible to simply number the instructions. In 
contrast, most CISC use variable\-length instruction encodings, so it 
is usually necessary to use a byte\-offset as the index. Given the 
instruction index, the operation descriptor specifies the effect of 
the instruction in an abstract manner. For example, it might express 
that the instruction stores calle\-saved register r1
at offset 16 
in the stack frame. 
.PP
.SH PROCEDURES

.PP
A runtime code\-generator registers the dynamic unwind\-info of a 
procedure by setting up a structure of type unw_dyn_info_t
and calling _U_dyn_register(),
passing the address of the 
structure as the sole argument. The members of the 
unw_dyn_info_t
structure are described below: 
.TP
void *next
 Private to libunwind\&.
Must not be used 
by the application. 
.TP
void *prev
 Private to libunwind\&.
Must not be used 
by the application. 
.TP
unw_word_t start_ip
 The start\-address of the 
instructions of the procedure (remember: procedure are defined to be 
contiguous pieces of code, so a single code\-range is sufficient). 
.TP
unw_word_t end_ip
 The end\-address of the 
instructions of the procedure (non\-inclusive, that is, 
end_ip\-start_ip
is the size of the procedure in 
bytes). 
.TP
unw_word_t gp
 The global\-pointer value in use 
for this procedure. The exact meaing of the global\-pointer is 
architecture\-specific and on some architecture, it is not used at 
all. 
.TP
int32_t format
 The format of the unwind\-info. 
This member can be one of UNW_INFO_FORMAT_DYNAMIC,
UNW_INFO_FORMAT_TABLE,
or 
UNW_INFO_FORMAT_REMOTE_TABLE\&.
.TP
union u
 This union contains one sub\-member 
structure for every possible unwind\-info format: 
.RS
.TP
unw_dyn_proc_info_t pi
 This member is used 
for format UNW_INFO_FORMAT_DYNAMIC\&.
.TP
unw_dyn_table_info_t ti
 This member is used 
for format UNW_INFO_FORMAT_TABLE\&.
.TP
unw_dyn_remote_table_info_t rti
 This member 
is used for format UNW_INFO_FORMAT_REMOTE_TABLE\&.
.RE
.RS
.PP
The format of these sub\-members is described in detail below. 
.RE
.PP
.SS PROC\-INFO FORMAT
.PP
This is the preferred dynamic unwind\-info format and it is generally 
the one used by full\-blown runtime code\-generators. In this format, 
the details of a procedure are described by a structure of type 
unw_dyn_proc_info_t\&.
This structure contains the following 
members: 
.PP
.RE
.TP
unw_word_t name_ptr
 The address of a 
(human\-readable) name of the procedure or 0 if no such name is 
available. If non\-zero, The string stored at this address must be 
ASCII NUL terminated. For source languages that use name\-mangling 
(such as C++ or Java) the string stored at this address should be 
the \fIdemangled\fP
version of the name. 
.PP
.TP
unw_word_t handler
 The address of the 
personality\-routine for this procedure. Personality\-routines are 
used in conjunction with exception handling. See the C++ ABI draft 
(http://www.codesourcery.com/cxx\-abi/) for an overview and a 
description of the personality routine. If the procedure has no 
personality routine, handler
must be set to 0. 
.PP
.TP
uint32_t flags
 A bitmask of flags. At the 
moment, no flags have been defined and this member must be 
set to 0. 
.PP
.TP
unw_dyn_region_info_t *regions
 A NULL\-terminated 
linked list of region\-descriptors. See section ``Region 
descriptors\&'' below for more details. 
.PP
.SS TABLE\-INFO FORMAT
.PP
This format is generally used when the dynamically generated code was 
derived from static code and the unwind\-info for the dynamic and the 
static versions is identical. For example, this format can be useful 
when loading statically\-generated code into an address\-space in a 
non\-standard fashion (i.e., through some means other than 
dlopen()).
In this format, the details of a group of procedures 
is described by a structure of type unw_dyn_table_info\&.
This structure contains the following members: 
.PP
.TP
unw_word_t name_ptr
 The address of a 
(human\-readable) name of the procedure or 0 if no such name is 
available. If non\-zero, The string stored at this address must be 
ASCII NUL terminated. For source languages that use name\-mangling 
(such as C++ or Java) the string stored at this address should be 
the \fIdemangled\fP
version of the name. 
.PP
.TP
unw_word_t segbase
 The segment\-base value 
that needs to be added to the segment\-relative values stored in the 
unwind\-info. The exact meaning of this value is 
architecture\-specific. 
.PP
.TP
unw_word_t table_len
 The length of the 
unwind\-info (table_data)
counted in units of words 
(unw_word_t).
.PP
.TP
unw_word_t table_data
 A pointer to the actual 
data encoding the unwind\-info. The exact format is 
architecture\-specific (see architecture\-specific sections below). 
.PP
.SS REMOTE TABLE\-INFO FORMAT
.PP
The remote table\-info format has the same basic purpose as the regular 
table\-info format. The only difference is that when libunwind
uses the unwind\-info, it will keep the table data in the target 
address\-space (which may be remote). Consequently, the type of the 
table_data
member is unw_word_t
rather than a pointer. 
This implies that libunwind
will have to access the table\-data 
via the address\-space\&'s access_mem()
call\-back, rather than 
through a direct memory reference. 
.PP
From the point of view of a runtime\-code generator, the remote 
table\-info format offers no advantage and it is expected that such 
generators will describe their procedures either with the proc\-info 
format or the normal table\-info format. The main reason that the 
remote table\-info format exists is to enable the 
address\-space\-specific find_proc_info()
callback (see 
unw_create_addr_space(3))
to return unwind tables whose 
data remains in remote memory. This can speed up unwinding (e.g., for 
a debugger) because it reduces the amount of data that needs to be 
loaded from remote memory. 
.PP
.SH REGIONS DESCRIPTORS

.PP
A region descriptor is a variable length structure that describes how 
each instruction in the region affects the frame state. Of course, 
most instructions in a region usualy do not change the frame state and 
for those, nothing needs to be recorded in the region descriptor. A 
region descriptor is a structure of type 
unw_dyn_region_info_t
and has the following members: 
.TP
unw_dyn_region_info_t *next
 A pointer to the 
next region. If this is the last region, next
is NULL\&.
.TP
int32_t insn_count
 The length of the region in 
instructions. Each instruction is assumed to have a fixed size (see 
architecture\-specific sections for details). The value of 
insn_count
may be negative in the last region of a procedure 
(i.e., it may be negative only if next
is NULL).
A 
negative value indicates that the region covers the last \fIN\fP
instructions of the procedure, where \fIN\fP
is the absolute value 
of insn_count\&.
.TP
uint32_t op_count
 The (allocated) length of 
the op_count
array. 
.TP
unw_dyn_op_t op
 An array of dynamic unwind 
directives. See Section ``Dynamic unwind directives\&'' for a 
description of the directives. 
.PP
A region descriptor with an insn_count
of zero is an 
\fIempty region\fP
and such regions are perfectly legal. In fact, 
empty regions can be useful to establish a particular frame state 
before the start of another region. 
.PP
A single region list can be shared across multiple procedures provided 
those procedures share a common prologue and epilogue (their bodies 
may differ, of course). Normally, such procedures consist of a canned 
prologue, the body, and a canned epilogue. This could be described by 
two regions: one covering the prologue and one covering the epilogue. 
Since the body length is variable, the latter region would need to 
specify a negative value in insn_count
such that 
libunwind
knows that the region covers the end of the procedure 
(up to the address specified by end_ip).
.PP
The region descriptor is a variable length structure to make it 
possible to allocate all the necessary memory with a single 
memory\-allocation request. To facilitate the allocation of a region 
descriptors libunwind
provides a helper routine with the 
following synopsis: 
.PP
size_t
_U_dyn_region_size(int
op_count);
.PP
This routine returns the number of bytes needed to hold a region 
descriptor with space for op_count
unwind directives. Note 
that the length of the op
array does not have to match exactly 
with the number of directives in a region. Instead, it is sufficient 
if the op
array contains at least as many entries as there are 
directives, since the end of the directives can always be indicated 
with the UNW_DYN_STOP
directive. 
.PP
.SH DYNAMIC UNWIND DIRECTIVES

.PP
A dynamic unwind directive describes how the frame state changes 
at a particular point within a region. The description is in 
the form of a structure of type unw_dyn_op_t\&.
This 
structure has the following members: 
.TP
int8_t tag
 The operation tag. Must be one 
of the unw_dyn_operation_t
values described below. 
.TP
int8_t qp
 The qualifying predicate that controls 
whether or not this directive is active. This is useful for 
predicated architecturs such as IA\-64 or ARM, where the contents of 
another (callee\-saved) register determines whether or not an 
instruction is executed (takes effect). If the directive is always 
active, this member should be set to the manifest constant 
_U_QP_TRUE
(this constant is defined for all 
architectures, predicated or not). 
.TP
int16_t reg
 The number of the register affected 
by the instruction. 
.TP
int32_t when
 The region\-relative number of 
the instruction to which this directive applies. For example, 
a value of 0 means that the effect described by this directive 
has taken place once the first instruction in the region has 
executed. 
.TP
unw_word_t val
 The value to be applied by the 
operation tag. The exact meaning of this value varies by tag. See 
Section ``Operation tags\&'' below. 
.PP
It is perfectly legitimate to specify multiple dynamic unwind 
directives with the same when
value, if a particular instruction 
has a complex effect on the frame state. 
.PP
Empty regions by definition contain no actual instructions and as such 
the directives are not tied to a particular instruction. By 
convention, the when
member should be set to 0, however. 
.PP
There is no need for the dynamic unwind directives to appear 
in order of increasing when
values. If the directives happen to 
be sorted in that order, it may result in slightly faster execution, 
but a runtime code\-generator should not go to extra lengths just to 
ensure that the directives are sorted. 
.PP
IMPLEMENTATION NOTE: should libunwind
implementations for 
certain architectures prefer the list of unwind directives to be 
sorted, it is recommended that such implementations first check 
whether the list happens to be sorted already and, if not, sort the 
directives explicitly before the first use. With this approach, the 
overhead of explicit sorting is only paid when there is a real benefit 
and if the runtime code\-generator happens to generated sorted lists 
naturally, the performance penalty is limited to a simple O(N) check. 
.PP
.SS OPERATIONS TAGS
.PP
The possible operation tags are defined by enumeration type 
unw_dyn_operation_t
which defines the following 
values: 
.PP
.TP
UNW_DYN_STOP
 Marks the end of the dynamic unwind 
directive list. All remaining entries in the op
array of the 
region\-descriptor are ignored. This tag is guaranteed to have a 
value of 0. 
.PP
.TP
UNW_DYN_SAVE_REG
 Marks an instruction which saves 
register reg
to register val\&.
.PP
.TP
UNW_DYN_SPILL_FP_REL
 Marks an instruction which 
spills register reg
to a frame\-pointer\-relative location. The 
frame\-pointer\-relative offset is given by the value stored in member 
val\&.
See the architecture\-specific sections for a description 
of the stack frame layout. 
.PP
.TP
UNW_DYN_SPILL_SP_REL
 Marks an instruction which 
spills register reg
to a stack\-pointer\-relative location. The 
stack\-pointer\-relative offset is given by the value stored in member 
val\&.
See the architecture\-specific sections for a description 
of the stack frame layout. 
.PP
.TP
UNW_DYN_ADD
 Marks an instruction which adds 
the constant value val
to register reg\&.
To add subtract 
a constant value, store the two\&'s\-complement of the value in 
val\&.
The set of registers that can be specified for this tag 
is described in the architecture\-specific sections below. 
.PP
.TP
UNW_DYN_POP_FRAMES
 .PP
.TP
UNW_DYN_LABEL_STATE
 .PP
.TP
UNW_DYN_COPY_STATE
 .PP
.TP
UNW_DYN_ALIAS
 .PP
unw_dyn_op_t 
.PP
_U_dyn_op_save_reg(); 
_U_dyn_op_spill_fp_rel(); 
_U_dyn_op_spill_sp_rel(); 
_U_dyn_op_add(); 
_U_dyn_op_pop_frames(); 
_U_dyn_op_label_state(); 
_U_dyn_op_copy_state(); 
_U_dyn_op_alias(); 
_U_dyn_op_stop(); 
.PP
.SH IA\-64 SPECIFICS

.PP
\- meaning of segbase member in table\-info/table\-remote\-info format 
\- format of table_data in table\-info/table\-remote\-info format 
\- instruction size: each bundle is counted as 3 instructions, regardless 
of template (MLX) 
\- describe stack\-frame layout, especially with regards to sp\-relative 
and fp\-relative addressing 
\- UNW_DYN_ADD can only add to ``sp\&'' (always a negative value); use 
POP_FRAMES otherwise 
.PP
.SH SEE ALSO

.PP
libunwind(3),
_U_dyn_register(3),
_U_dyn_cancel(3)
.PP
.SH AUTHOR

.PP
David Mosberger\-Tang
.br 
Hewlett\-Packard Labs
.br 
Palo\-Alto, CA 94304
.br 
Email: \fBdavidm@hpl.hp.com\fP
.br
WWW: \fBhttp://www.hpl.hp.com/research/linux/libunwind/\fP\&.
.\" NOTE: This file is generated, DO NOT EDIT.