Test that creates MiniDebugInfo-containing binary and then checks if it
can recover the procedure names from its coredump.
Signed-off-by: Martin Milata <mmilata@redhat.com>
At least on ARM unw_context_t and ucontext_t are not the same types, so
use unw_context_t.
See also commit 24112f6d9b ("Fix some test
failures on x86_64 on distros with small default stacks.")
Gtest-trace.c: In function 'do_backtrace':
Gtest-trace.c:66:3: warning: initialization from incompatible pointer type [enabled by default]
Gtest-trace.c:67:3: warning: passing argument 2 of '_Uarm_init_local' from incompatible pointer type [enabled by default]
../include/libunwind-common.h:239:1: note: expected 'struct unw_context_t *' but argument is of type 'struct ucontext_t *'
Gtest-bt.c: In function 'do_backtrace':
Gtest-bt.c:65:3: warning: initialization from incompatible pointer type [enabled by default]
Gtest-bt.c:66:3: warning: passing argument 2 of '_Uarm_init_local' from incompatible pointer type [enabled by default]
../include/libunwind-common.h:239:1: note: expected 'struct unw_context_t *' but argument is of type 'struct ucontext_t *'
The intention in the test cases is to print the "instruction pointer"
value at certain places, and on ARM we will want to get the Program
Counter in these cases. IP is a scratch register, and not very
interesting.
Program test-coredump-unwind was modified to map backing files based on
virtual addresses instead of segment numbers.
The crasher.c is a program that essentially calls some functions and
then writes to invalid address causing a crash. Before that, it detects
which executables are mapped to which virtual addresses and writes this
information to a file suitable for consumption by test-coredump-unwind.
The mapping information is obtained form /proc/self/maps, so currently
it only works on linux.
The test itself is a shell script, which first runs the program and then
runs test-coredump-unwind on the resulting core and address space
map file to check whether the stack trace obtained from the dump roughly
corresponds to what it should look like.
Signed-off-by: Martin Milata <mmilata@redhat.com>
- Add tdep macro for {dwarf,ia64}_find_unwind_table so that ia64
doesn't try to use dwarf code.
- Fix extraneous #if.
- Fix mistyped filename in Makefile.am.
- Link ia64-specific tests with correct libraries.
Signed-off-by: Martin Milata <mmilata@redhat.com>
The testcase tests/Gtest-dyn1.c uses the signal() function and should
therefore include the corresponding header file.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Define an appropriate fdesc struct and its corresponding accessors that take
care of the thumb marker on ARM. Call the __clear_cache built-in instead of
flush_cache if the GNU compiler is used.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
The test-async-sig.c, test-flush-cache.c and Ltest_resume_sig.c define
UNW_LOCAL_ONLY and therefore only need LIBUNWIND_local. Gtest-dyn1.c is
calling '_U_dyn_cancel' and test-trace.c is using 'unw_backtrace' which
are in LIBUNWIND_local.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Creating an alternate signal stack with a size of SIGSTKSZ (usually 8k) is
not enough on some targets because unw_cursor_t is bigger than that already.
Since the size of unw_cursor_t is part of the ABI the UNW_TDEP_CURSOR_LEN
can't be changed without breaking existent code. Therefore size of the
alternate signal stack has been increased to 1 MiB.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
We'd like to avoid calls to all malloc related functions
so libunwind is still usable from such allocators.
Signed-off-by: Paul Pluzhnikov <ppluzhnikov@google.com>
Dropping the extra frame for unw_backtrace itself using unw_step is
approximately 15% slower than skipping the frame in tdep_trace. So
drop the frame in the latter, and make the function a private
implementation detail for libunwind, not an exported interface.
Also moves unw_getcontext call back into unw_backtrace to avoid an
extra call frame in case slow_backtrace does not get inlined into
unw_backtrace.
Adds new function to perform a pure stack walk without unwinding,
functionally similar to backtrace() but accelerated by an address
attribute cache the caller maintains across calls.
This test case relies on old libunwind internals such as the arm_stackframe.
Since the ARM extbtl-parser now operates on the DWARF model directly the
arm-extbl-test isn't of any particular use anymore.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Avoids an endless loop when passing unknown options.
Signed-off-by: Zachary T Welch <zwelch@codesourcery.com>
Signed-off-by: Ken Werner <ken.werner@linaro.org>
This adds support for linkers that do not pull in the dependent shared
libraries of libunwind-$(arch).la and libunwind-setjmp.la implicitly.
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Eliminates unused libraries from test program linking. Substitutes
'$(top_builddir)' for '..' to clarify library locations.
Signed-off-by: Zachary T Welch <zwelch@codesourcery.com>
Original code was accessing rs_cache memory without holding a lock
in some cases. If there was sufficient cache pressure, entry being
accessed may be overwritten by another thread, resulting in a data
race.
We now make a thread local copy of the data, before releasing the
lock. If we end up supporting UNW_CACHE_PER_THREAD properly
in the future, this memcpy should be unnecessary.
Greetings,
Attached patch is rather on the obvious side: setting caching policy and
than doing nothing is pointless; we'd better acutally test that it works!
Tested on Linux/x86_64.
Thanks,
--
Paul Pluzhnikov
Currently, libunwind allocates several PATH_MAX entries on stack, while
trying to find a binary via /proc/.../maps.
However stack space may be at premium (especially when sigaltstack is used),
and PATH_MAX on Linux is 4096, while SIGSTKSZ is only 8192 on x86.
Attached patch eliminates multiple PATH_MAX stack allocations, and simplifies
code in maps_next, at the cost of being unable to do anything if we can't
mmap one page. It appears to me that under such low-memory conditions,
libunwind will fail shortly elsewhere anyway.
This patch also disables more of debug_frame-handling code when
CONFIG_DEBUG_FRAME is undefined.
Tested on Linux/x86_64 with and without CONFIG_DEBUG_FRAME, no regressions.
Provide a special implementation for ia64, because the unwind
information is such that an IP adjustment is not necessary before
looking up unwind info.
Bad things happen if libunwind only provides parts of the ABI and
the rest come from libgcc.
Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com>
getcontext in libc.
Also cleanup the namespace (check-name-space passes on x86_64 now).
Replace uses of offsets.h with ucontext_i.h.
Rename _x86_64_setcontext to _Ux86_64_setcontext.
TBD: Add CFI annotations for get/setcontext.
Signed-off-by: Paul Pluzhnikov <ppluzhnikov@google.com>
Signed-off-by: Arun Sharma <arun.sharma@google.com>
* src/arm/unwind_i (arm_lock, arm_local_resume): Define.
* src/ptrace/_UPT_find_proc_info.c: Handle ARM like X86 etc.
* tests/flush-cache.S (flush_cache): Add (dummy) ARM-version.
ARM does need executable stack, even on Linux...
Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Bruna Moreira <bruna.moreira@indt.org.br>
- Gtest-bt: like on x86/-64, the stack size passed to sigaltstack() is
too small for ARM thus causing segmentation fault due to stack
overflow.
- Gtest-dyn1: code size definition of dynamic function (template()) on
testcase is too big for ARM architecture so memcpy() reads invalid
memory causing random crashes (segmentation fault). A better
solution would be to compile the function in a separate binary,
mmap() it and memcpy() from it instead, so maximum size is known for
sure.
- check-name-space.in: fix some "bashisms", it causes the script to
fail to run on N8XX's busybox shell.
Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Bruna Moreira <bruna.moreira@indt.org.br>
On some systems executable stacks are denied. Since libunwind and the
tests don't actually need executable stacks this patch marks all
assembly files as not needing it.
The original patch comes from frysk:
2007-04-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* src/hppa/getcontext.S, src/hppa/setcontext.S, src/hppa/siglongjmp.S,
src/ia64/Ginstall_cursor.S, src/ia64/Linstall_cursor.S,
src/ia64/dyn_info_list.S, src/ia64/getcontext.S, src/ia64/longjmp.S,
src/ia64/setjmp.S, src/ia64/siglongjmp.S, src/ia64/sigsetjmp.S,
src/ppc64/longjmp.S, src/ppc64/siglongjmp.S, src/x86/longjmp.S,
src/x86/siglongjmp.S, src/x86_64/longjmp.S, src/x86_64/setcontext.S,
src/x86_64/siglongjmp.S: Stack should be non-executable, for SELinux.
I added a couple more markers for new files in current libunwind.
Before this patch you would get the following on selinux enabled
systems without allow_exec_stack: error while loading shared
libraries:
libunwind.so.7: cannot enable executable stack as shared object
requires: Permission denied
After the patch that error disappears and all test results are similar
to the results on systems without executable stack protection.
* tests/ia64-test-setjmp.c (doit): New forward declaration.
(doit_pointer): New function pointer variable initialized to DOIT.
(doit): Self-call made by an unoptimizable volatile indirect call.
* tests/test-ptrace.c (target_pid_kill): New function.
(target_pid, main): TARGET_PID made static, for target_pid_kill ().
(main): Register target_pid_kill () for atexit(3).
2007-04-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* tests/Gtest-dyn1.c, tests/test-async-sig.c, tests/test-ptrace.c:
Fixed lockups on broken libunwind (as ppc64 is).
2007-03-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* tests/test-async-sig.c (do_backtrace): Limit maximum backtrace depth
to 100 iterations; it workarounds FC6 DWARF-broken glibc.
2006-12-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* tests/test-ptrace.c (main): Check for too many unexpected child
signals, such as the common `SIGSEGV'.
